HomeServicesMaintenance Tips


Check Operation of:

 

1)

Filters

- Replace standard filter(s)

   

 

 
 

2)

Blower

- Oil or grease motor and bearings as required
- Adjust or replace belts as necessary
- Fan blade balance

       
 

3)

Induced Draft Fan Motor

     

- Rusted or unsafe collector box and inducer housing

       
 

4)

Combustion Chamber

     

- Cracks, rusted or unsafe condition

       
 

5)

Gas piping

- Ignition module
- Gas cock, rusted or damaged lines

       
 

6)

Flame

- Pressures, ignition, draft
- Burner, clean if necessary
- Pilot assembly

       
 

7)

Condensate Trap and Line

     

- Operation of dampers
- Operation of outdoor air controls
- Clean screens or replace as required

       
 

8)

Economizer

 
       
 

9)

Thermostat

- Calibration
- Standard T87F**

       
 

10)

Measure Carbon Monoxide Levels

 

 

 

 

=

heat exchangers, fire boxes and condensate pumps are excluded from coverage.

* =

oil-fired boiler

** =

digital thermostat at replacement value

 


M.J. Emonds Mechanical Contractors, LLC
17 Nutmeg Lane, Glastonbury, CT 06033
tel. 860.657.4554 fax 860.657.4558
e-mail: info@emonds.com