HomeServicesMaintenance Tips


Check Operation of:

1)

Induced draft fan motor

 

 

2)

Chimney

Measure carbon monoxide levels

     

3)

Heat Exchanger

   

- Rusted or cracked

     

4)

Blower

- Fan blade balance
- Oil or grease motor and bearings as required
- Replace belt or adjust as required

     

5)

Safety Switches

   

- High and low limit and pressure switches

     

6)

Vacuum Combustion Chamber

   

- Pressures, ignition, draft
- Burner, clean if necessary
- Pilot assembly

     

7)

Humidifier

- Water tray, clean as necessary
- Saddle valve and water line

     

8)

Replace Standard Filter(s)

     

9)

Thermostat

- Calibration
- Standard T87F**

     

10)

Condensate Trap and Line

     

11)

Burner and Burner Motor

   

- Replace Fuel nozzle
- Oil pump drive, fan and screen

 

 

24-hour Emergency
Service Plans

 

 

=

heat exchangers, fire boxes and condensate pumps are excluded from coverage.

* =

oil-fired boiler

** =

digital thermostat at replacement value

 


M.J. Emonds Mechanical Contractors, LLC
17 Nutmeg Lane, Glastonbury, CT 06033
tel. 860.657.4554 fax 860.657.4558
e-mail: info@emonds.com